Point 2. Silicone base double-layer structure
It can be used as interior decoration due to its reliable sense of volume.
The structure is divided into two parts: silicone and polycarbonate plastic . Please place the silicone part on a flat surface before use and insert it in the correct way.
※When the PC surface is cooled and the silicone part is a little warm, it is the best time to separate the mold. If the time is too long and the wax has completely hardened, and you want to separate it at this time, the silicone part will shrink and squeeze with the central silicone, making it difficult to separate.
Point 3.Produced by Candleworks
The Candleworks logo or wordmark is printed on top of the mold frame or near the wick line .
This product is designed by Candleworks. Plagiarism of the mold is strictly prohibited. Any unauthorized copying will result in legal liability.
Point 4. Compare sizes
Reference photo shows the size difference between the two molds.
PC Bellagio Shell Mold Trapezoidal Candle Holder Mold (12cm x13cm)
|
| Size |
Diameter 12cm x height 13cm |
| Material |
Silicone, polycarbonate plastic |
| Amount of wax required |
About 540 grams |
| Recommended wax core |
Smokeless wax wick No. 4-5, white cotton wax wick No. 4-5
|
|
(A smaller sized wax wick may be used to prevent damage to the bracket portion.) |
| Product Features |
- This is a permanent plastic mold that can be reused multiple times.
- Do not use a hot air blower when cleaning the mold or removing wax as this may cause the mold to warp.
- It is recommended to use a release agent to facilitate easy removal from the mold.
- Since the mold is separated from the top and bottom, a seam is created in the center of the candle. When finished, gently scrape the surface clean with a knife.
|
