Epoxy Resin (1:1) 500g

Products include:
Epoxy resin A glue 237ml
Epoxy resin B glue 237ml
Origin China

Precautions when using are as follows:
1. It is best to wear woven gloves or rubber gloves when using glue to avoid accidentally soiling your hands.
2. If you accidentally come into contact with it, just wash it with soap immediately. If your eyes come into contact with it accidentally, rinse it with plenty of water immediately. In serious cases, please seek medical treatment in time.
3. Please keep the workplace ventilated and prevent smoke and fire when using it in large quantities. The workplace should be well ventilated and open flames are prohibited. When there is a large leakage, open the windows for ventilation and pay attention to fireworks.

Required tools:
Paper bowl or cup, wooden or plastic mixing stick, scale, silicone mold, table paper
Step 1
Table paper On the table, according to the size of the mold, weigh out the appropriate main dosage in a paper bowl at a ratio of one to one
Step 2 (Optional)
Add color, glitter or pearlescent powder. It is pure transparent color without adding color.
Step 3
Stir gently and evenly, from the inside to the outside and from the outside to the inside.
※ If you stir too hard, bubbles will be generated!!
Step 4
Weigh the hardener, add it and stir evenly!! If the stirring is uneven, it will not be completely hardened.
Step 5
Slowly pour epoxy resin into the mold. You can tap the mold lightly to let the air float up, and then use a toothpick or sharp object to prick it.
Step 6
Let it sit for 1 to 2 days, then take out the silicone mold and it’s done!

If different types of fillers or colorants are added, room temperature and humidity will affect the curing time and hardness.

Warm Tips:
1. Mix resin and hardener 1 to 1.
2. The curing time and working time are based on normal temperature 25℃. If the temperature is too cold, try using hot water to heat the glue (submerge the bottle in hot water) or a heat gun
3. It works best if you are making a piece less than 3/8 inch (0.95cm) thick.
4. Do not leave it outdoors permanently as all epoxies will eventually turn yellow due to sunlight.
5. The formation of bubbles mainly occurs when the resin is mixed, or the epoxy resin reacts with the surface to be coated. It is necessary to keep the surface clean and completely dry, and mix slowly, carefully and thoroughly with a stick.
6. Keep away from children. Use epoxy and thinner in a well-ventilated area and do not use epoxy finishes in direct sunlight.